Garmin Nuvi 785T - Hiking GPS Receiver Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Sistem Navigasi Mobil Garmin Nuvi 785T - Hiking GPS Receiver. Garmin Nuvi 785T - Hiking GPS Receiver 13 halaman. Msn direct owner's manual supplement
Juga untuk Garmin Nuvi 785T - Hiking GPS Receiver: Suplemen Panduan Pemilik (8 halaman), Panduan Memulai Cepat (9 halaman), Informasi Keamanan dan Produk (32 halaman), Informasi Produk (4 halaman), Pernyataan Kesesuaian (1 halaman), Suplemen Panduan Pemilik (15 halaman)

Step 1: Mount the nüvi

1. Clean and dry your windshield and the

suction cup with a lint-free cloth. Remove

the clear plastic from the suction cup.

Place the suction cup on the windshield.

2. Plug the vehicle power cable into the

power connector on the right side of the

cradle.

3. Snap the cradle onto the suction cup

arm.

Suction cup mount

4. Flip the lever back, toward the

windshield.

5. Fit the bottom of your nüvi into the

cradle.

6. Tilt the nüvi back until it snaps into place.

Cradle

Power cable

7. Plug the other end of the vehicle power

cable into a power outlet in your vehicle.

Your unit should turn on automatically if it

is plugged in and your vehicle is running.

Step 2: Configure the nüvi

To turn on your nüvi, slide the

key to the left. Follow the on-screen

instructions.

Go outdoors to an open area, out of garages,

and away from tall buildings. Stop your

vehicle, and turn on the nüvi. Acquiring

satellite signals may take a few minutes.

The

bars indicate GPS satellite

strength. When one bar is green, the nüvi

has acquired satellite signals. Now you can

select a destination and navigate to it.

Power