- ページ 4

カーナビゲーションシステム Garmin Nuvi 785T - Hiking GPS ReceiverのPDF クイック・スタート・マニュアルをオンラインで閲覧またはダウンロードできます。Garmin Nuvi 785T - Hiking GPS Receiver 13 ページ。 Msn direct owner's manual supplement
Garmin Nuvi 785T - Hiking GPS Receiver にも：オーナーズマニュアル補足 (8 ページ), クイック・スタート・マニュアル (9 ページ), 安全性と製品情報 (32 ページ), 製品情報 (4 ページ), 適合宣言 (1 ページ), オーナーズマニュアル補足 (15 ページ)

Step 1: Mount the nüvi

1. Clean and dry your windshield and the

suction cup with a lint-free cloth. Remove

the clear plastic from the suction cup.

Place the suction cup on the windshield.

2. Plug the vehicle power cable into the

power connector on the right side of the

cradle.

3. Snap the cradle onto the suction cup

arm.

Suction cup mount

4. Flip the lever back, toward the

windshield.

5. Fit the bottom of your nüvi into the

cradle.

6. Tilt the nüvi back until it snaps into place.

Cradle

Power cable

7. Plug the other end of the vehicle power

cable into a power outlet in your vehicle.

Your unit should turn on automatically if it

is plugged in and your vehicle is running.

Step 2: Configure the nüvi

To turn on your nüvi, slide the

key to the left. Follow the on-screen

instructions.

Go outdoors to an open area, out of garages,

and away from tall buildings. Stop your

vehicle, and turn on the nüvi. Acquiring

satellite signals may take a few minutes.

The

bars indicate GPS satellite

strength. When one bar is green, the nüvi

has acquired satellite signals. Now you can

select a destination and navigate to it.

Power