Garmin GHP 10 Panduan Pemilik - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Sistem GPS Kelautan Garmin GHP 10. Garmin GHP 10 28 halaman. Autopilot system, addendum
Juga untuk Garmin GHP 10: Panduan Petunjuk Instalasi (48 halaman), Panduan Petunjuk Instalasi (26 halaman), Pernyataan Kesesuaian (1 halaman), Referensi (1 halaman), Catatan Konfigurasi (14 halaman)

Halaman Cetak
Garmin GHP 10 Panduan Pemilik
Powerboat Autopilot Operation

Circles Pattern

The circles pattern steers the boat in a continuous circle, in a specified
direction, and at a specified time interval.
setting Up the Circles Pattern
You can adjust the time the autopilot takes to complete the circle. The
default value creates a circle that takes 5 minutes to complete.
1. From the heading screen, select Menu > Pattern Steering > Circles >
Time.
2. Select
or
3. Select Done.
Following the Circles Pattern
1. From the heading screen, select Menu > Pattern Steering > Circles.
2. Select engage.
3. Select an option:
• Select
to begin a clockwise turn.
• Select
to begin a counter-clockwise turn.
6
to set the time.
The autopilot follows the circles pattern, and the heading screen shows
the time of the circles pattern ➀.
The autopilot positions the boat so that the circle pattern is centered on
the location at which you engage the pattern.
TIP: To quickly resume a pattern after you make a heading adjustment with
the helm or the soft keys
(page
3), select the center soft key twice.
➀
GHC 10 Owner's Manual