Garmin GHP 10 소유자 매뉴얼 - 페이지 10

{카테고리_이름} Garmin GHP 10에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Garmin GHP 10 28 페이지. Autopilot system, addendum
Garmin GHP 10에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (48 페이지), 설치 지침 매뉴얼 (26 페이지), 적합성 선언 (1 페이지), 참조 (1 페이지), 구성 참고 사항 (14 페이지)

페이지 인쇄
Garmin GHP 10 소유자 매뉴얼
Powerboat Autopilot Operation

Circles Pattern

The circles pattern steers the boat in a continuous circle, in a specified
direction, and at a specified time interval.
setting Up the Circles Pattern
You can adjust the time the autopilot takes to complete the circle. The
default value creates a circle that takes 5 minutes to complete.
1. From the heading screen, select Menu > Pattern Steering > Circles >
Time.
2. Select
or
3. Select Done.
Following the Circles Pattern
1. From the heading screen, select Menu > Pattern Steering > Circles.
2. Select engage.
3. Select an option:
• Select
to begin a clockwise turn.
• Select
to begin a counter-clockwise turn.
6
to set the time.
The autopilot follows the circles pattern, and the heading screen shows
the time of the circles pattern ➀.
The autopilot positions the boat so that the circle pattern is centered on
the location at which you engage the pattern.
TIP: To quickly resume a pattern after you make a heading adjustment with
the helm or the soft keys
(page
3), select the center soft key twice.
➀
GHC 10 Owner's Manual