Garmin GPSMAP 17 Panduan Petunjuk Instalasi - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Sistem GPS Kelautan Garmin GPSMAP 17. Garmin GPSMAP 17 17 halaman. Gps receiver/antenna
Juga untuk Garmin GPSMAP 17: Panduan Petunjuk Instalasi (16 halaman), Panduan Petunjuk Instalasi (12 halaman), Panduan Instalasi (16 halaman), Panduan Referensi (1 halaman), Referensi Teknis (30 halaman), Panduan Petunjuk Instalasi (19 halaman), Pernyataan Kesesuaian (1 halaman), Spesifikasi Teknis (40 halaman), Panduan Memulai Cepat (16 halaman)

NSTALLATION

NSTRUCTIONS

Surface Mounting the GPSMAP 3005C

Tools

• Drill and drill bit

• Screwdriver

• Pencil

• Mounting hardware (not included)

NOTE: Mounting hardware (fasteners) not included. Mounting holes are 5/16" (7.9 mm)

in diameter.

To install the bail mount and unit:

1. Using the bail mount as a template, mark the location of the four mounting holes with

a pencil. Be sure to leave at least two inches of clearance behind the unit for the

wiring connector.

2. Using an appropriate size drill bit, drill pilot holes for the fasteners that you choose to

use.

3. Secure the bail mount to the surface with the fasteners.

4. Loosen the mounting knobs.

5. Slide the unit into the bail mount, and tighten the mounting knobs.

Bail mount

NSTALLATION

NSTRUCTIONS

Mounting knobs

Bail Mount

GPSMAP 3005C & GPS 17