Garmin GPSMAP 17 Installation Instructions Manual - Page 4

Browse online or download pdf Installation Instructions Manual for Marine GPS System Garmin GPSMAP 17. Garmin GPSMAP 17 17 pages. Gps receiver/antenna
Also for Garmin GPSMAP 17: Installation Instructions Manual (16 pages), Installation Instructions Manual (12 pages), Installation Manual (16 pages), Reference Manual (1 pages), Technical Reference (30 pages), Installation Instructions Manual (19 pages), Declaration Of Conformity (1 pages), Technical Specifications (40 pages), Quick Start Manual (16 pages)

Print Page
Garmin GPSMAP 17 Installation Instructions Manual
I
I
NSTALLATION
NSTRUCTIONS
Surface Mounting the GPSMAP 3005C
Tools
• Drill and drill bit
• Screwdriver
• Pencil
• Mounting hardware (not included)
NOTE: Mounting hardware (fasteners) not included. Mounting holes are 5/16" (7.9 mm)
in diameter.
To install the bail mount and unit:
1. Using the bail mount as a template, mark the location of the four mounting holes with
a pencil. Be sure to leave at least two inches of clearance behind the unit for the
wiring connector.
2. Using an appropriate size drill bit, drill pilot holes for the fasteners that you choose to
use.
3. Secure the bail mount to the surface with the fasteners.
4. Loosen the mounting knobs.
5. Slide the unit into the bail mount, and tighten the mounting knobs.
Bail mount
2
I
I
NSTALLATION
NSTRUCTIONS
Mounting knobs
Bail Mount
GPSMAP 3005C & GPS 17