Garmin GPSMAP 5215 Panduan Petunjuk Instalasi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Sistem GPS Kelautan Garmin GPSMAP 5215. Garmin GPSMAP 5215 25 halaman. Optical mouse
Juga untuk Garmin GPSMAP 5215: Panduan Referensi Cepat (2 halaman), Panduan Pemilik (2 halaman), Panduan Pemilik (2 halaman), Panduan Referensi Cepat (2 halaman), Panduan Petunjuk Instalasi (25 halaman), Referensi Teknis (42 halaman), Templat Pemasangan Siram (2 halaman), Informasi Keselamatan Penting (4 halaman), Manual Suplemen (24 halaman)

Halaman Cetak

Garmin GPSMAP 5215 Panduan Petunjuk Instalasi

Wiring to an Optional Alarm

The GPSMAP 4000/5000 series chartplotter can be used with a lamp, a horn, or both, to sound or flash an alert when the chartplotter displays a

message. The alarm does not need to be wired for the GPSMAP 4000/5000 chartplotter to function. The alarm circuit switches to a low-voltage

state when the alarm sounds. The maximum current is 100 mA, and a relay is needed to limit the current from the chartplotter to 100 mA. To

select between visual and audible alerts, install a switch.

Garmin

GPSMAP 4000/5000 series

chartplotter

Wiring to a DB-9 PC Serial Connector

The GPSMAP 4008/4208/4010/4210/4012/4212/5008/5208/5012/5212 chartplotters can be connected to a PC with a serial port by wiring the

chartplotter to a DB-9 serial connector.

Garmin

GPSMAP 4000/5000 series

chartplotter

FUSe

7.5 A - 42 V

POWer

CABle

NMeA 0183

CABle

Wiring to a lamp, a horn, or both.

WIre

See TABle FOr

WIre COlOrS

FUSe

7.5 A - 42 V

reD (POWer)

POWer

BlACk (PWr GND)

CABle

BlACk (DATA GND)

rX / B(-)

NMeA 0183

CABle

rX / A(+)

TX / A(-)

TX / B(+)

Wiring to a DB-9 Serial PC Connector

BATTery

10–35 Vdc

WIre

COlOr

reD (POWer)

BlACk (GND)

relAy

yellOW (AlArM)

100 mA MAX

COIl CUrreNT

BATTery

10–35 Vdc

DB-9 PIN

NUMBerS

PIN 5: GND

PIN 3: TX

PIN 2: rX

UNCONNeCTeD

GPSMAP 4000/5000 Series Installation Instructions

HOrN

lAMP

DB-9 Serial

PC Connector

end View