Garmin GPSMAP 5215 Handleiding voor installatie-instructies - Pagina 18

Blader online of download pdf Handleiding voor installatie-instructies voor {categorie_naam} Garmin GPSMAP 5215. Garmin GPSMAP 5215 25 pagina's. Optical mouse
Ook voor Garmin GPSMAP 5215: Snelle referentiehandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Gebruikershandleiding (2 pagina's), Snelle referentiehandleiding (2 pagina's), Handleiding voor installatie-instructies (25 pagina's), Technische referentie (42 pagina's), Inbouwsjabloon (2 pagina's), Belangrijke veiligheidsinformatie (4 pagina's), Supplement handleiding (24 pagina's)

Pagina afdrukken

Garmin GPSMAP 5215 Handleiding voor installatie-instructies

Wiring to an Optional Alarm

The GPSMAP 4000/5000 series chartplotter can be used with a lamp, a horn, or both, to sound or flash an alert when the chartplotter displays a

message. The alarm does not need to be wired for the GPSMAP 4000/5000 chartplotter to function. The alarm circuit switches to a low-voltage

state when the alarm sounds. The maximum current is 100 mA, and a relay is needed to limit the current from the chartplotter to 100 mA. To

select between visual and audible alerts, install a switch.

Garmin

GPSMAP 4000/5000 series

chartplotter

Wiring to a DB-9 PC Serial Connector

The GPSMAP 4008/4208/4010/4210/4012/4212/5008/5208/5012/5212 chartplotters can be connected to a PC with a serial port by wiring the

chartplotter to a DB-9 serial connector.

Garmin

GPSMAP 4000/5000 series

chartplotter

FUSe

7.5 A - 42 V

POWer

CABle

NMeA 0183

CABle

Wiring to a lamp, a horn, or both.

WIre

See TABle FOr

WIre COlOrS

FUSe

7.5 A - 42 V

reD (POWer)

POWer

BlACk (PWr GND)

CABle

BlACk (DATA GND)

rX / B(-)

NMeA 0183

CABle

rX / A(+)

TX / A(-)

TX / B(+)

Wiring to a DB-9 Serial PC Connector

BATTery

10–35 Vdc

WIre

COlOr

reD (POWer)

BlACk (GND)

relAy

yellOW (AlArM)

100 mA MAX

COIl CUrreNT

BATTery

10–35 Vdc

DB-9 PIN

NUMBerS

PIN 5: GND

PIN 3: TX

PIN 2: rX

UNCONNeCTeD

GPSMAP 4000/5000 Series Installation Instructions

HOrN

lAMP

DB-9 Serial

PC Connector

end View