alkitronic EFCip Panduan Pengoperasian dan Pemeliharaan - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengoperasian dan Pemeliharaan untuk Perangkat Keras Komputer alkitronic EFCip. alkitronic EFCip 16 halaman. Electric torque multiplier

Halaman Cetak

4.4 Bolting programs

4.4.1 Bolting according to the torque method

Adjustment mode 1 - with/without automatic release function

Start Display

Enter

bolting program

Step 1

Enter

final torque

Step 2

Enter

release angle

Step 3

Correction procedere:

push button and

return to step 1.

"OK" signalisation (bolting pro-

cess was flawless, final torque is

reached).

"nOK" signalisation flashes (faulty

bolting).

electric torque multipliers

Once the values have been checked -

start bolting process.

Check settings, repeat bolting.

Take into account relevant provisions of bolting.

Use e.g. new bolts etc.

After a short time, the display

jumps to the next image.

Confirm input

No automatic release function:

Set angle to zero "0".

Confirm resp. the acknowledgment is automatically.

Place on next bolt/nut and start

bolting process.