Garmin Colorado 400c Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Peralatan Kelautan Garmin Colorado 400c. Garmin Colorado 400c 26 halaman. Oregon series
Juga untuk Garmin Colorado 400c: Panduan Pemilik (40 halaman), Panduan Pemilik (48 halaman), Panduan Referensi Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Pemilik (48 halaman), Informasi Keselamatan Penting (48 halaman), Manual (Denmark) (48 halaman)

Garmin Colorado 400c Panduan Pemilik

Installing the Batteries

The Colorado operates on two (2) AA batteries (not
included). You can use Alkaline, NiMH, or lithium
batteries.
To install the batteries:
1. Remove the battery cover by lifting the latch and
sliding it off the back
of the unit.
2. Insert the batteries,
observing the proper
polarity. A diagram
is molded into the
battery compartment.
3. Reinstall the battery
cover by sliding the
casing back on the
unit and fastening the
latch.
Remove the batteries when
you do not plan to use the
unit for several months.
Stored data is not lost when
batteries are removed.
Colorado Series Owner's Manual
Battery cover
Latch
Battery compartment

Turning On and Off the Colorado

To power on the Colorado:
Press and hold the Power key until the
Welcome page displays on the Colorado.
To power off the Colorado:
Press and hold the Power key.

First Time Turning On the Colorado

The first time you turn on your Colorado, the GPS
receiver must collect satellite data and establish its
current location. To ensure proper initialization, the
Colorado is shipped from the factory in AutoLocate
mode, which allows the receiver to "find itself"
anywhere in the world.
NOTE: To receive satellite signals, you must be
outdoors and have a clear view of the sky.
After powering on the first time, the Colorado moves
you through three setup screens: language selection,
time zone, and daylight savings time mode. For
complete information on initial Colorado setup, see the
Colorado Series Quick Start Guide.
G
S
ettinG
tarted