AEG FAVORIT 40650 Informasi Pengguna - Halaman 8
Jelajahi secara online atau unduh pdf Informasi Pengguna untuk Mesin pencuci piring AEG FAVORIT 40650. AEG FAVORIT 40650 40 halaman. Aeg dishwasher
Juga untuk AEG FAVORIT 40650: Informasi Pengguna (40 halaman)
Halaman Cetak
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 1.
The LED indicator for function button 1 will flash.
The LED indicator for the end of the dishwashing cycle will flash simul-
taneously:
– The number of times that the LED indicator for the end of the dish-
washing cycle flashes corresponds to the hardness setting.
– This sequence of flashes is repeated several times, with a 3 second
pause in-between.
4. Pressing function button 1 increases the hardness setting by 1 degree.
(Exception: hardness setting 1 follows hardness setting 10).
5. When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to "1", this switches off the
control indicator for special salt.
1)
in °d
)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
below 4
1) (°d) German degree, measure of the hardness of water
2) [mmol/l] millimol per litre, international unit for water hardness
3) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting
8
Water hardness
2)
in mmol/l
)
Range
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
I/II
below 0.7
Adjusting the hardness
setting
Manual
IV
1
III
II
0*
I
Number of
flashes
Electronic
3)
10
10
9
8
7
6
5
4*
3
2
1
no salt
necessary
9
8
7
6
5
4
3
2
1