Garmin GTX 345 Panduan Operator - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Operator untuk Radio Kelautan Garmin GTX 345. Garmin GTX 345 28 halaman. Enstrom 480b ads-b transponder
Juga untuk Garmin GTX 345: Panduan Pilot (34 halaman), Panduan Operator (28 halaman)
Halaman Cetak
UNCONTROLLED COPY WHEN DOWNOADED OR PRINTED
ENSTROM F-28F/280FX RFM SUPPLEMENT
6. The following system limitations are applicable when
there is no heading source interfaced to the GTX:
a. The traffic page is oriented to rotorcraft TRACK, and
may or may not align with the rotorcraft heading.
b. The traffic display will not show ADS-B traffic when
groundspeed is less than 15 kts. Aural traffic alerts
will issue, appropriately. If interfaced with TAS:
TAS traffic targets will continuously display at all
speeds.
If in excess of 15 knots in backward or sideward
flight, TAS and ADS-B targets may not correlate.
Two targets may appear on the display for each
actual target being received over both ADS-B and
TAS.
7-3. Operation
A view of the front panel is shown in Figure 7-3. The control
keys and functions are briefly explained in Table 7-1.
1. Position the AVI MASTER switch to ON to apply system
power, if not already switched on.
a. Press either the ON, SBY, or ALT keys to turn on
the unit.
b. After power-on, a start-up page is displayed while
the system performs a self-test. If the unit detects
an
"TRANSPONDER FAILED".
Report No. 28-AC-081
This electronic document is not linked to a subscription for revision control or distribution. Refer to the Optional
Equipment Supplement Publications Status link under the Technical Support Page of the Enstrom Helicopter website
for the current revision level of the Rotorcraft Flight Manual Supplement.
Figure 7-3. GTX 345 Front Panel
internal
failure,
the
screen
Jan 15/19
7-5
displays