AEG 34942G Petunjuk Pengoperasian dan Pemasangan - Halaman 16

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Kompor AEG 34942G. AEG 34942G 26 halaman. Gas hobs
Juga untuk AEG 34942G: Panduan Pengoperasian dan Instalasi (26 halaman), Petunjuk Pengoperasian dan Pemasangan (26 halaman), Petunjuk Pengoperasian dan Pemasangan (26 halaman), Petunjuk Pengoperasian dan Pemasangan (27 halaman)

Installation

this book be ignored.

On the end of the shaft, which includes the GJ 1/2" threaded elbow,

adjustment is fixed so that the washer is fitted between the components as

shown in the diagram. Screw the parts together without using excessive

force.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe,

i.e. steel or copper.

The connection should be suitable for connecting to RC 1/2 (1/2 BSP male

thread).

When the final connection has been made, it is essential that a thorough leak

test is carried out on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

It is important to install the elbow correctly, with the shoulder on the

end of the thread, fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

FO 0264

A) End of shaft with nut

B) Washer

C) Elbow

FO 0814