AEG 34942G Çalıştırma ve Kurulum Talimatları - Sayfa 16

Hob AEG 34942G için çevrimiçi göz atın veya pdf Çalıştırma ve Kurulum Talimatları indirin. AEG 34942G 26 sayfaları. Gas hobs
Ayrıca AEG 34942G için: Kullanım ve Kurulum Kılavuzu (26 sayfalar), Çalıştırma ve Kurulum Talimatları (26 sayfalar), Çalıştırma ve Kurulum Talimatları (26 sayfalar), Çalıştırma ve Kurulum Talimatları (27 sayfalar)

Installation

this book be ignored.

On the end of the shaft, which includes the GJ 1/2" threaded elbow,

adjustment is fixed so that the washer is fitted between the components as

shown in the diagram. Screw the parts together without using excessive

force.

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe,

i.e. steel or copper.

The connection should be suitable for connecting to RC 1/2 (1/2 BSP male

thread).

When the final connection has been made, it is essential that a thorough leak

test is carried out on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

It is important to install the elbow correctly, with the shoulder on the

end of the thread, fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.

FO 0264

A) End of shaft with nut

B) Washer

C) Elbow

FO 0814