Brother MFC-T910DW Panduan Referensi - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Semua dalam Satu Printer Brother MFC-T910DW. Brother MFC-T910DW 30 halaman. Brief explanations for routine operations
Juga untuk Brother MFC-T910DW: Panduan Keamanan Produk (24 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Referensi (29 halaman)

Halaman Cetak

Fax

Before Faxing

Telephone Line Interference/

VoIP

If you are having problems sending or

receiving a fax due to possible interference on

the telephone line or if you are using a VoIP

system, we recommend changing the modem

speed to minimise errors in fax operations.

Press Settings.

Press a or b to select the following:

a. Select [Initial Setup].

Press OK.

b. Select [Compatibility].

Press OK.

c. Select [Normal] or [Basic(for

VoIP)]. Press OK.

• [Basic(for VoIP)] reduces

the modem speed to 9,600 bps

and turns off Error Correction

Mode (ECM). Unless interference

is a recurring problem on your

telephone line, you may prefer to

use it only when needed.

To improve compatibility with

most VoIP services, Brother

recommends changing the

compatibility setting to

[Basic(for VoIP)].

• [Normal] sets the modem

speed at 14,400 bps.

Press Stop/Exit.

• VoIP (Voice over IP) is a type of phone

system that uses an Internet

connection, rather than a traditional

phone line.

• Brother does not recommend the use

of a VoIP line. VoIP limitations in

general can cause some functions of

the fax machine not to work correctly.

Send a Fax

NOTE

This feature is available only for monochrome

faxes.

Load your document in the ADF or place

it on the scanner glass.

Press

(FAX).

The LCD displays:

Press Start

Enter Number

Fax Resolution

Standard

Contrast

Enter the fax number in one of the

following ways:

• Dial Pad (Enter the fax number

manually.)

Press all digits of the number using

the dial pad.

• Redial (Redial the last number you

dialled.)

Press Redial/Pause.

• Outgoing call (Select a number from

the Outgoing Call history.)

Press a or b to select the following:

Auto