Brother MFC-T910DW Panduan Referensi - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Semua dalam Satu Printer Brother MFC-T910DW. Brother MFC-T910DW 30 halaman. Brief explanations for routine operations
Juga untuk Brother MFC-T910DW: Panduan Keamanan Produk (24 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Referensi (29 halaman)

Halaman Cetak
Brother MFC-T910DW Panduan Referensi
a. Select [Call History].
Press OK.
b. Select [Outgoing Call].
Press OK.
c. Select the number you want, and
then press OK.
d. Press c to select [Apply].
• Caller ID (Select a number from the
Caller ID history.)
Press a or b to select the following:
a. Select [Call History].
Press OK.
b. Select [Caller ID History].
Press OK.
c. Select the number you want, and
then press OK.
d. Press c to select [Apply].
• [Address Book] (Select a number
from the Address Book.)
Press a or b to select the following:
a. Select [Address Book].
Press OK.
b. Select [Search]. Press OK.
c. Do one of the following:
- Enter the two-digit Speed Dial
number using the dial pad.
- Select a number from the list in
the following ways:
i.
Select [Alphabetical
Order] or [Numerical
Order]. Press OK.
ii. Select the number you
want. Press OK.
iii. Press c to select [Apply].
4
To change the fax settings, press a or b
to select the setting you want to change,
and then press OK.
5
When finished, press Black Start.
6
Do one of the following:
• If you are using the ADF, the machine
starts scanning and sending the
document.
• If you are using the scanner glass
and pressed Black Start, the
machine starts scanning the first
page.
Go to the next step.
7
When the LCD displays [Next
page?], do one of the following:
• Press c to scan another page. Place
the next page on the scanner glass,
and then press c. The machine starts
scanning the page.
Repeat this step for each additional
page.
• Press d to send the fax when finished
scanning pages. The machine starts
sending the document.
Choose the Correct
Receive Mode
The factory setting of Receive Mode is "Fax
Auto". Your machine will automatically receive
any faxes that are sent to it. There are four
Receive Modes of this machine as below.
Operation Display
Fax Auto
Fax/Tel
External TAD
Fax Manual
1
Press Settings.
2
Press a or b to select the following:
Factory Setting
Ring Delay
Ring Delay: four
times
Fax detection: On
Ring Delay: four
times
12