AEG 79902 Panduan Petunjuk Pengoperasian - Halaman 31

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian untuk Kompor AEG 79902. AEG 79902 44 halaman. Electronic gas hob

Upon completion there must be no cut, or stray

strands of wire present and the cable clamp must

be secure over the outer sheath.

A cut off plug inserted into a 13 amp

socket is a serious safety (shock)

hazard. Ensure that the cut off plug is

disposed of safely.

Permanent Connection

In the case of a permanent connection, it is

necessary that you install a double pole switch

between the hob and the electricity supply

(mains), with a minimum gap of 3 mm. between

the switch contacts and of a type suitable for

the required load in compliance with the current

electric regulations.

The switch must not break the yellow and green

earth cable at any point.

Ensure that the hob supply cable does

not come into contact with surfaces

with temperatures higher than 50 deg.

Supply cable replacement

The cable used to connect the hob to the

electrical supply must comply to the

specifications given below.

Min. size Cable/flex

0.75 mm

Cable / flex type

H05 V2V2-F (T90)

Fuse

3 A