Brother DCP-J105 Panduan Memulai Cepat - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Printer Brother DCP-J105. Brother DCP-J105 25 halaman. Color multi-function printer
Juga untuk Brother DCP-J105: Panduan Pengguna Tingkat Lanjut (44 halaman), Panduan Pengguna (48 halaman), Panduan Keamanan Produk (18 halaman)

Halaman Cetak

For Wireless Network Users

For wireless network interface users (DCP-J105 only)

Before you begin

NOTE

If you have previously configured the wireless settings of the machine, you must reset the network settings

before you can configure the wireless settings again.

On your machine, press Menu.

Press a or b to choose 3.Network. Press OK.

Press a or b to choose 0.Network Reset. Press OK.

Press a twice to accept the change.

NOTE

To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access

point/router), see instructions in the Software and Network User's Guide on the CD-ROM.

To view the Software and Network User's Guide:

1 Turn on your computer. Insert the CD-ROM into your CD-ROM drive.

For Windows

2 Choose your model and the language. The CD-ROM top menu will appear.

3 Click User's Guides, and then click PDF/HTML documents.

4 Click Software and Network User's Guide.

For Macintosh:

2 Double-click User's Guides. Choose your model and the language.

3 Click User's Guides, and then click Software and Network User's Guide.

Choose your wireless setup method

The following instructions will offer three methods for setting up your Brother machine on a wireless network. If

you began the wireless setup from step 9 on page 6, go to method b or c. For all other users, choose the method

you prefer for your environment.

Method a is the recommended way to connect (Windows

Setup using the CD-ROM (Windows

• We recommend using a computer wirelessly connected to your network for this method.

• A USB cable might be needed in some cases.

Now go to

or Macintosh).

and Macintosh)

page 15