Brother DCP-J105 빠른 시작 매뉴얼 - 페이지 13

{카테고리_이름} Brother DCP-J105에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Brother DCP-J105 25 페이지. Color multi-function printer
Brother DCP-J105에 대해서도 마찬가지입니다: 고급 사용자 설명서 (44 페이지), 사용자 설명서 (48 페이지), 제품 안전 매뉴얼 (18 페이지)

페이지 인쇄

For Wireless Network Users

For wireless network interface users (DCP-J105 only)

Before you begin

NOTE

If you have previously configured the wireless settings of the machine, you must reset the network settings

before you can configure the wireless settings again.

On your machine, press Menu.

Press a or b to choose 3.Network. Press OK.

Press a or b to choose 0.Network Reset. Press OK.

Press a twice to accept the change.

NOTE

To set up your machine in Ad-hoc mode (connected to a wireless-capable computer without an access

point/router), see instructions in the Software and Network User's Guide on the CD-ROM.

To view the Software and Network User's Guide:

1 Turn on your computer. Insert the CD-ROM into your CD-ROM drive.

For Windows

2 Choose your model and the language. The CD-ROM top menu will appear.

3 Click User's Guides, and then click PDF/HTML documents.

4 Click Software and Network User's Guide.

For Macintosh:

2 Double-click User's Guides. Choose your model and the language.

3 Click User's Guides, and then click Software and Network User's Guide.

Choose your wireless setup method

The following instructions will offer three methods for setting up your Brother machine on a wireless network. If

you began the wireless setup from step 9 on page 6, go to method b or c. For all other users, choose the method

you prefer for your environment.

Method a is the recommended way to connect (Windows

Setup using the CD-ROM (Windows

• We recommend using a computer wirelessly connected to your network for this method.

• A USB cable might be needed in some cases.

Now go to

or Macintosh).

and Macintosh)

page 15