Brother DCP-J1100DW Panduan Referensi - Halaman 23

Jelajahi secara online atau unduh pdf Panduan Referensi untuk Printer Brother DCP-J1100DW. Brother DCP-J1100DW 31 halaman.
Juga untuk Brother DCP-J1100DW: Panduan Pengaturan Cepat (2 halaman), Panduan Memulai Cepat (2 halaman), Panduan Referensi (31 halaman), Panduan Keamanan Produk (18 halaman), Panduan Pengaturan Cepat (2 halaman), Panduan Pengaturan Cepat (2 halaman)

Halaman Cetak

Error Message

Cannot Detect

Cannot Detect Ink

Volume

Data Remaining in

Memory

Disconnected

Document Jam/too

Long

High Temperature

Hub is Unusable.

Ink Absorber

NearFull

Ink Absorber Pad

Full

Action

Replace the cartridge with a Brother Original ink cartridge. If the error

message remains, contact Brother customer service or your local

Brother dealer.

Take out the new ink cartridge and reinstall it slowly and firmly until it

locks into place.

For more detailed information, see the Online User's Guide: Replace

the Ink Cartridges.

Check the model numbers of the ink cartridges and install the correct

ink cartridges.

See Related Information: Supply Specifications at the end of this

section.

Replace the cartridge with a Brother Original ink cartridge. If the error

message remains, contact Brother customer service or your local

Brother dealer.

Press

. The machine will cancel the job and clear it from the

memory. Try to print again.

Try to send or receive again.

If calls are stopped repeatedly and you are using a VoIP (Voice over

IP) system, try changing the Compatibility to Basic (for VoIP).

See Related Information: Telephone Line Interference/VoIP at the end

of this section.

The document was not inserted or fed correctly, or the document

scanned from the ADF was too long.

For more detailed information, see the Online User's Guide: Document

Jams.

After cooling the room, allow the machine to cool down to room

temperature. Try again when the machine has cooled down.

Hubs, including a USB flash drive with a built-in hub, are not

supported. Unplug the device from the USB direct interface.

The ink absorber box must be replaced soon. Contact Brother

customer service or your local Brother dealer.

• The ink absorber box absorbs the small amount of ink emitted

during print head cleaning.

The ink absorber box must be replaced. Contact Brother customer

service or your local Brother Authorised Service Centre to have your

machine serviced.