Brother GTX Panduan Referensi Pengguna - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Referensi Pengguna untuk Printer Brother GTX. Brother GTX 16 halaman. Step by step photo instructions
Juga untuk Brother GTX: Panduan Membongkar Kemasan (17 halaman), Perakitan Dudukan (5 halaman)
Halaman Cetak
ADDITIONAL WEEKLY MAINTENANCE
Visual inspection is important to keep your printer up and
running. Verify all the moving parts of the machine and also
check for leakage of ink.
Please follow all the instructions that appear on the
printer display.
When you see a yellow number, push the
warning messages. Complete all tasks as instructed as priority
before continuing to print.
INTERNAL CLEANING OF PRINTER
Regular cleaning of your printer will ensure smooth operation of your equipment
Clean the inside of your printer if it is covered with Ink
Always use this menu to perform cleanings or replace parts:
Menu
>
1
2
CLEAN
12
Maintenance
Maintenance Part Clean/Replace
>
Use the Clean Stick R dipped in Cleaning Solution to wipe
away the stains on the 3 Carriage Roller Guides.
Move the carriage from side to side to wipe all around the 3
rollers completely.
Clean the Carriage Guide Shaft and the 3 sides [upper, front,
and lower] of the Roller Guide with a non pilling cloth and
3
moisten with a small amount of isopropyl alcohol [95%]
Do not use alcohol on any other parts except for the carriage
guide shaft and the roller guide.
Apply a small amount of
Carriage Guide Shaft
GREASE
Remove 3 screws to take out the encoder metal cover.
With your non-pilling cloth that is moistened with
alcohol, carefully clean both sides of the Encoder Strip.
Perform a CR Speed Adjustment.
Menu > Printer Setting > CR Speed Adjustment > OK
Print out a Nozzle Check pattern.
key to review the
and follow instructions on the display
>
MENU
MENU
OK
OK
Molykote 30 Grease
only. [never on the Roller Guide]
onto the