AEG C67600K Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 33

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Kompor AEG C67600K. AEG C67600K 46 halaman. Ceramic glass induction hob
Juga untuk AEG C67600K: Panduan Petunjuk Pemasangan dan Pengoperasian (44 halaman), Panduan Petunjuk Pemasangan dan Pengoperasian (47 halaman)

... the residual heat indicator suddenly fails to operate except for

_ or h.

Check whether

– the "On/Off" switch was activated by mistake.

– the sensor fields may be partially covered by a damp cloth, liquid or

similar.

– the safety shut-down was activated.

... the letter _ or h is still displayed by the residual heat indicator

after switching off the cooking zones.

Check whether

– the cooking zone has only been on for a short time and is therefore

not yet hot enough.

If the cooking zone is hot, please ring customer service.

... a cooking zone cannot be switched off

Check whether

– the sensor fields may be partially covered by a damp cloth or by liq-

uid.

– the lock mechanism is switched on.

... a cooking zone cannot be switched on

Check whether

– the lock mechanism is switched on.

... the indicator f is flashing

Check whether

– the pan is located on the correct cooking zone,

– the diameter of the pan base is too small for the cooking zone,

– the pan is suitable for induction.

... _ appears on the display

Check whether

– the cooking zone has overheated.

switch off the appropriate cooking zone and let it cool down. Try

switching on the cooking zone again using a suitable pan after a few

minutes.

– the automatic switch-down for the cooking zone has triggered.

You can reactivate the cooking zone by switching it off and on brief-

ly.