AEG C67600K 설치 및 운영 지침 매뉴얼 - 페이지 33
{카테고리_이름} AEG C67600K에 대한 설치 및 운영 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. AEG C67600K 46 페이지. Ceramic glass induction hob
AEG C67600K에 대해서도 마찬가지입니다: 설치 및 운영 지침 매뉴얼 (44 페이지), 설치 및 운영 지침 매뉴얼 (47 페이지)
페이지 인쇄
... the residual heat indicator suddenly fails to operate except for
_ or h.
Check whether
– the "On/Off" switch was activated by mistake.
– the sensor fields may be partially covered by a damp cloth, liquid or
similar.
– the safety shut-down was activated.
... the letter _ or h is still displayed by the residual heat indicator
after switching off the cooking zones.
Check whether
– the cooking zone has only been on for a short time and is therefore
not yet hot enough.
If the cooking zone is hot, please ring customer service.
... a cooking zone cannot be switched off
Check whether
– the sensor fields may be partially covered by a damp cloth or by liq-
uid.
– the lock mechanism is switched on.
... a cooking zone cannot be switched on
Check whether
– the lock mechanism is switched on.
... the indicator f is flashing
Check whether
– the pan is located on the correct cooking zone,
– the diameter of the pan base is too small for the cooking zone,
– the pan is suitable for induction.
... _ appears on the display
Check whether
– the cooking zone has overheated.
switch off the appropriate cooking zone and let it cool down. Try
switching on the cooking zone again using a suitable pan after a few
minutes.
– the automatic switch-down for the cooking zone has triggered.
You can reactivate the cooking zone by switching it off and on brief-
ly.
73