LG - Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor LG -. LG - 15 halaman. Led
Juga untuk LG -: Panduan Pemilik (40 halaman), Panduan Pemilik (22 halaman), Panduan Pemilik (24 halaman), Panduan Pemilik (21 halaman), Panduan Pengguna (39 halaman), Panduan Pemilik (29 halaman), Panduan Pemilik (12 halaman), Panduan Pemilik (12 halaman), Panduan Pemilik (24 halaman), Panduan Pemilik (18 halaman), Panduan Pemilik (16 halaman), Panduan Pengguna (12 halaman), Panduan Pengguna (19 halaman), Panduan Pengguna (18 halaman), Panduan Pengguna (14 halaman), Panduan Pengguna (19 halaman), Panduan Pengguna (13 halaman), Panduan Pengguna (16 halaman), Panduan Pemilik (21 halaman), Panduan Servis (29 halaman), Panduan Pemilik (32 halaman), Setup Manual (37 halaman)

Halaman Cetak
LG - Panduan Pengguna
Troubleshooting

Display image is incorrect

Display Position is
incorrect.
On the screen
background, vertical
bars or stripes are
visible.
Any horizontal noise
appearing in any
image or characters
are not clearly
portrayed.
The screen color is
mono or abnormal.
The screen blinks.
Press the AUTO/SELECT button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, adjust the image
position using the H position and V position icon
in the on screen display.
Check Control Panel --> Display --> Settings and
see if the frequency or the resolution were changed.
If yes, readjust the video card to the recommend
resolution.
Press the AUTO/SELECT button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
vertical bars or stripes using the CLOCK icon in the
on screen display.
Press the AUTO/SELECT button to automatically
adjust your display image to the ideal setting.
If the results are unsatisfactory, decrease the
horizontal bars using the PHASE icon in the on
screen display.
Check Control Panel --> Display --> Settings and
adjust the display to the recommended resolution or
adjust the display image to the ideal setting. Set the
color setting higher than 24 bits (true color).
Check if the signal cable is properly connected and
use a screwdriver to fasten if necessary.
Make sure the video card is properly inserted in the
slot.
Set the color setting higher than 24 bits (true color)
at Control Panel - Settings.
Check if the screen is set to interlace mode and if
yes, change it to the recommend resolution.
Make sure the power voltage is high enough, It has
to be higher than AC100-240V 50/60Hz.
A11