LG - User Manual - Page 11

Browse online or download pdf User Manual for Monitor LG -. LG - 15 pages. Led
Also for LG -: Owner's Manual (40 pages), Owner's Manual (22 pages), Owner's Manual (24 pages), Owner's Manual (21 pages), User Manual (39 pages), Owner's Manual (29 pages), Owner's Manual (12 pages), Owner's Manual (12 pages), Owner's Manual (24 pages), Owner's Manual (18 pages), Owner's Manual (16 pages), User Manual (12 pages), User Manual (19 pages), User Manual (18 pages), User Manual (14 pages), User Manual (19 pages), User Manual (13 pages), User Manual (16 pages), Owner's Manual (21 pages), Service Manual (29 pages), Owner's Manual (32 pages), Setup Manual (37 pages)

Print Page

Troubleshooting

Display image is incorrect

Display Position is

incorrect.

On the screen

background, vertical

bars or stripes are

visible.

Any horizontal noise

appearing in any

image or characters

are not clearly

portrayed.

The screen color is

mono or abnormal.

The screen blinks.

Press the AUTO/SELECT button to automatically

adjust your display image to the ideal setting.

If the results are unsatisfactory, adjust the image

position using the H position and V position icon

in the on screen display.

Check Control Panel --> Display --> Settings and

see if the frequency or the resolution were changed.

If yes, readjust the video card to the recommend

resolution.

Press the AUTO/SELECT button to automatically

adjust your display image to the ideal setting.

If the results are unsatisfactory, decrease the

vertical bars or stripes using the CLOCK icon in the

on screen display.

Press the AUTO/SELECT button to automatically

adjust your display image to the ideal setting.

If the results are unsatisfactory, decrease the

horizontal bars using the PHASE icon in the on

screen display.

Check Control Panel --> Display --> Settings and

adjust the display to the recommended resolution or

adjust the display image to the ideal setting. Set the

color setting higher than 24 bits (true color).

Check if the signal cable is properly connected and

use a screwdriver to fasten if necessary.

Make sure the video card is properly inserted in the

slot.

Set the color setting higher than 24 bits (true color)

at Control Panel - Settings.

Check if the screen is set to interlace mode and if

yes, change it to the recommend resolution.

Make sure the power voltage is high enough, It has

to be higher than AC100-240V 50/60Hz.

A11