Brother P-touch H500 Panduan Pengaturan Cepat - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengaturan Cepat untuk Pembuat label Brother P-touch H500. Brother P-touch H500 36 halaman.

GETTING STARTED

Feed Only

This function will advance the tape approximately 24.5mm resulting in a blank label

sticking out of the tape cassette. This action is recommended when using Fabric tapes,

which should be cut using scissors.

Press the Feed & Cut key.

"Feed & Cut?" will appear on the LCD display.

Using the

key.

The message "Feeding Tape... Please Wait" appears while the tape is fed.

To exit or cancel this function press Esc.

You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1,

-2) to make the screen easier to read. The default setting is "0".

Press the Adjustment key.

Select "LCD Contrast" using

Press the OK or Enter key.

• Press the Esc key to return to the previous step.

• Pressing the Space key on the contrast setting screen sets the contrast to the default

value "0".

Press the Backlight key to turn the backlight on.

When the backlight is turned on, press the Backlight key again to turn the light off.

The display is easier to see with the backlight on. The default setting is on.

• Power can be saved when the backlight is turned off.

• The backlight is turned off automatically if there is no operation for more than 10

seconds. It can be turned back on by pressing any key. The backlight turns off when

printing.

key to select the "Feed Only", and then press either OK or Enter

LCD Display

key and set the value using

key.