Brother P-touch H500 Podręcznik szybkiej konfiguracji - Strona 28
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Urządzenie do tworzenia etykiet Brother P-touch H500. Brother P-touch H500 36 stron.
Drukuj stronę
GETTING STARTED
Feed Only
This function will advance the tape approximately 24.5mm resulting in a blank label
sticking out of the tape cassette. This action is recommended when using Fabric tapes,
which should be cut using scissors.
1
Press the Feed & Cut key.
"Feed & Cut?" will appear on the LCD display.
2
Using the
key.
The message "Feeding Tape... Please Wait" appears while the tape is fed.
To exit or cancel this function press Esc.
LCD Contrast
You can change the contrast setting of the LCD display to one of five levels (+2, +1, 0, -1,
-2) to make the screen easier to read. The default setting is "0".
1
Press the Adjustment key.
2
Select "LCD Contrast" using
3
Press the OK or Enter key.
• Press the Esc key to return to the previous step.
• Pressing the Space key on the contrast setting screen sets the contrast to the default
value "0".
Back Light
Press the Backlight key to turn the backlight on.
When the backlight is turned on, press the Backlight key again to turn the light off.
The display is easier to see with the backlight on. The default setting is on.
• Power can be saved when the backlight is turned off.
• The backlight is turned off automatically if there is no operation for more than 10
seconds. It can be turned back on by pressing any key. The backlight turns off when
printing.
28
LCD Display
or
key to select the "Feed Only", and then press either OK or Enter
LCD Display
or
key and set the value using
or
key.