Brother P-touch Pro PT-H111 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-touch Pro PT-H111. Brother P-touch Pro PT-H111 16 halaman.

Brother P-touch Pro PT-H111 Panduan Pengguna

Supplies and Accessories

Tape Cassettes: Visit support.brother.com for a
list of available Brother P-touch
tapes.
AC Adapter:
AD-24 (optional)
Cutter Unit:
TC-4 (replacement)
If the cutter blade becomes blunt after repetitive use
and the tape cannot be cut cleanly, turn the cutter
board as shown in the illustration
If you still have difficulties, replace with a new Cutter
Unit (stock no. TC-4) from an authorized Brother
reseller.
Replacing the Cutter Unit
Remove the two sections of the Cutter Unit
1.
(green) in the direction of the arrows as
illustrated below
Install a new Cutter Unit. Push it in gently until
2.
it locks into place.
Cutter Board
WARNING
Do not touch the cutter blade directly with your
fingers.
1
.
2
.

Specifications

Dimensions:
4.3" X 8.0" X 2.2"
(W x D x H)
(Approx. 109 (W) X 202 (D) X 55 (H) mm)
Weight:
Approx. 0.9 lb. (Approx. 400 g)
(without batteries and tape cassette)
Power supply:
Six AAA alkaline batteries (LR03)
Six AAA Ni-MH batteries (HR03)*
Optional AC Adapter (AD-24)
Tape cassette:
Brother P-touch TZe tape widths:
0.13" (3.5 mm), 0.23" (6 mm),
0.35" (9 mm), and 0.47" (12 mm)
1
*
Visit support.brother.com for the latest
information about the recommended batteries.
For FAQs, Troubleshooting, and manuals, visit:
support.brother.com.
1