Brother P-touch Pro PT-H111 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-touch Pro PT-H111. Brother P-touch Pro PT-H111 16 halaman.

LABEL APPLICATION KEYS

Cable Wrap

Use this function to create a label

that can be wrapped around a

cable or wire.

Turn on the Cable Rotate/Repeat function to print

text repeatedly along the length of the label so

that it can easily be read from any angle.

To activate the Text Repeat function, press

and then select [CableRot/Rpt].

[Txt Rpt: Off]

(

Cable diameter: 0.2" to 3.6" (3 mm to 90 mm)

Default: 0.3" (6 mm)

NOTE

• We recommend using Brother Flexible ID Tape for labels attached to cables and wires.

• To cancel the Cable Wrap/Cable Flag/Faceplate functions during operation, press

accordingly.

• Depending on the format you select, the entire contents of your text may not be printed. For example, if the

text is too long to fit into the format, the [Text Limit!] error message will appear.

[Txt Rpt: On]

(

)

Use this function to create a

label that can be wrapped

around a cable or wire with its

ends pressed together to form a

flag.

Specify the length you want, or select [Auto] to

automatically adjust the flag length according to

the text length.

(

)

• Flag length: 0.4" to 8.0" (10 mm to 200 mm), Auto

• Use the Cable Flag function when the diameter

of the object is more than 0.2" (3 mm).

• Text cannot be rotated when using the Cable

Flag function.

(

)

Default: Auto

)