Brother P-touch Pro PT-H111 User Manual - Page 10
Browse online or download pdf User Manual for Label Maker Brother P-touch Pro PT-H111. Brother P-touch Pro PT-H111 16 pages.
Print Page
3
LABEL APPLICATION KEYS
Cable Wrap
Use this function to create a label
that can be wrapped around a
cable or wire.
Turn on the Cable Rotate/Repeat function to print
text repeatedly along the length of the label so
that it can easily be read from any angle.
To activate the Text Repeat function, press
and then select [CableRot/Rpt].
[Txt Rpt: Off]
/
(
Cable diameter: 0.2" to 3.6" (3 mm to 90 mm)
Default: 0.3" (6 mm)
NOTE
• We recommend using Brother Flexible ID Tape for labels attached to cables and wires.
• To cancel the Cable Wrap/Cable Flag/Faceplate functions during operation, press
accordingly.
• Depending on the format you select, the entire contents of your text may not be printed. For example, if the
text is too long to fit into the format, the [Text Limit!] error message will appear.
[Txt Rpt: On]
(
)
Cable Flag
Use this function to create a
label that can be wrapped
around a cable or wire with its
ends pressed together to form a
flag.
Specify the length you want, or select [Auto] to
automatically adjust the flag length according to
the text length.
(
)
• Flag length: 0.4" to 8.0" (10 mm to 200 mm), Auto
• Use the Cable Flag function when the diameter
of the object is more than 0.2" (3 mm).
• Text cannot be rotated when using the Cable
Flag function.
(
/
)
Default: Auto
/
)
or