Brother P-Touch PT-H200 Panduan Pengguna
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother P-Touch PT-H200. Brother P-Touch PT-H200 19 halaman. Electronic labeling system
Halaman Cetak
With your new Brother P-touch label maker, you can create a wide variety of custom, self-adhesive labels and
ribbons. This label maker uses Brother "TZe" tapes from 3.5 mm to 12 mm widths. "TZe" tape cassettes are available
in many colours and sizes. Visit www.brother.com for a complete list of tapes that work with your machine.
Read this guide before using this machine. After reading this guide, keep it in a safe place.
D01CHY001
1
GETTING STARTED
Power Supply and Ribbon Cassette or Tape Cassette
1
Cassette cover
Open the cassette cover by pressing the
highlighted area at the top end of the label maker.
• Make sure you turn the power off when replacing
batteries or ribbon/tape cassettes.
NOTE
When using the optional AC adapter (AD-24ESA)
Insert adapter cord into the AC adapter socket at the bottom of the label maker.
1.
Insert the plug into the nearest standard electrical socket.
2.
For the memory backup feature, use either AAA alkaline batteries (LR03) or Ni-MH batteries (HR03)
together when using the AC adapter.
ELECTRONIC LABELING SYSTEM
PT-H200
English
Print head
Tape cutter lever
User's Guide
2
Cutter's edge
Tape guides
End of tape
Insert the ribbon or tape cassette, making sure
it locks into place.
• Make sure the end of the ribbon/tape feeds under the tape guides.
• Use Genuine Brother P-touch TZe tapes with this label maker.
Tape exit slot
Toothed wheel