Brother PT-98OOPCN Panduan Pengguna - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother PT-98OOPCN. Brother PT-98OOPCN 20 halaman. Electronic labeling system
Halaman Cetak
5
Select the desired model, and then
click [OK].
Follow the on-screen instructions of the
driver installation.
When instructed, connect your printer
6
to the computer by using the USB cable,
and then turn on the printer.
AC adapter jack
AC adapter
7
Once the printer is detected, the driver
will automatically be installed.
When instructed to register your printer
8
online, select a registration method and
click [Next].
If you have selected to register the product
online, your default internet browser will
be launched in a new window.
9
When instructed to download the
optional tools, select your choice and
click [Next].
• If you choose "Yes, display the page",
you will go to the web site "solutions
center" page before finishing the
installation. (recommended)
[Select your region/country] -
[Choose your product] - [Downloads]
• If you choose "No, do not display the
page", you will continue the installation.
USB port
USB cable
24V
DC IN
Note
●
To download the optional tools later,
you can find them on this Web site:
http://solutions.brother.com/
[Select your region/country] -
[Choose your product] - [Downloads]
Click [Finish].
0
The software installation is now complete.
Restart your computer if you are instructed
to do so.
Start the software.
a
Click "Start" - "All Programs (Programs)" -
"Brother P-touch" - "P-touch Editor 5.0"
to start P-touch Editor 5.0.
When using Mac OS
This section explains how to install P-touch
Editor 5.0 and printer driver.
Note
●
Until P-touch Editor 5.0 installation is
completed, do not connect the printer to
Macintosh. Make sure the USB cable is
not connected until you are instructed to
connect it.
●
You must be logged on as a user with
administrator privileges to install this
software.
●
Turn off the printer with the power button
and then with the main power switch.
Below is the example for Mac OS X 10.5.7.
Start up Macintosh, and insert the
1
CD-ROM into the CD-ROM drive.
Double click the "PT_Series"
(CD-ROM) icon.
2
Double click "Brother PT-9700PC
Driver.pkg" in "Mac OS X" folder.
The Driver Installer starts up. Follow the
on-screen instructions.
17