Brother QL 570 - P-Touch B/W Direct Thermal Printer Panduan Pengguna - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pembuat label Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 36 halaman. Professional label printer
Juga untuk Brother QL 570 - P-Touch B/W Direct Thermal Printer: Brosur (4 halaman), Panduan Pengguna (26 halaman), Panduan Pengguna (40 halaman), Panduan Penyiapan & Pengoperasian (43 halaman), Panduan Penyiapan & Pengoperasian (45 halaman), Panduan Pengguna (2 halaman), Panduan Instalasi Perangkat Lunak (15 halaman)

Remove the backing paper

unit until the area pointed with arrow in the diagram below.

• Insert the sheet without removing the

• Check that the printing surface of cleaning sheet is upward.

Close the DK Roll compartment cover and press the ON/OFF button ( ) to turn the

Brother QL-570 on.

Press the Feed button for more than one second.

The roller spins by 4" (10 cm).

The adhesive face of cleaning sheet removes the stain or

dust on the roller.

• If not pressing the Feed button for more than one second,

the roller spins only 1/3" (8 mm).

• Dispose the cleaning sheet after use.

Label outlet maintenance

When the glue is attached on the label outlet and the machine jam a

label, pull out the power plug from the outlet and clean it up with cloth

dipped into ethanol or isopropyl alcohol.

and insert the edge

part of sheet.

Label outlet maintenance

of cleaning sheet into the printing

Feed button

Label outlet