Brother QL 570 - P-Touch B/W Direct Thermal Printer Manuel de l'utilisateur - Page 34

Parcourez en ligne ou téléchargez le pdf Manuel de l'utilisateur pour {nom_de_la_catégorie} Brother QL 570 - P-Touch B/W Direct Thermal Printer. Brother QL 570 - P-Touch B/W Direct Thermal Printer 36 pages. Professional label printer
Également pour Brother QL 570 - P-Touch B/W Direct Thermal Printer : Brochure (4 pages), Manuel de l'utilisateur (26 pages), Manuel de l'utilisateur (40 pages), Manuel de configuration et d'utilisation (43 pages), Manuel de configuration et d'utilisation (45 pages), Manuel de l'utilisateur (2 pages), Manuel d'installation du logiciel (15 pages)

Remove the backing paper

unit until the area pointed with arrow in the diagram below.

• Insert the sheet without removing the

• Check that the printing surface of cleaning sheet is upward.

Close the DK Roll compartment cover and press the ON/OFF button ( ) to turn the

Brother QL-570 on.

Press the Feed button for more than one second.

The roller spins by 4" (10 cm).

The adhesive face of cleaning sheet removes the stain or

dust on the roller.

• If not pressing the Feed button for more than one second,

the roller spins only 1/3" (8 mm).

• Dispose the cleaning sheet after use.

Label outlet maintenance

When the glue is attached on the label outlet and the machine jam a

label, pull out the power plug from the outlet and clean it up with cloth

dipped into ethanol or isopropyl alcohol.

and insert the edge

part of sheet.

Label outlet maintenance

of cleaning sheet into the printing

Feed button

Label outlet