Brother Stampcreator PRO SC2000USB Referensi Cepat - Halaman 34
Jelajahi secara online atau unduh pdf Referensi Cepat untuk Pembuat label Brother Stampcreator PRO SC2000USB. Brother Stampcreator PRO SC2000USB 36 halaman.
Halaman Cetak
Removing a jammed draft sheet or ID label sheet
For a jam at the draft tray slot ("CHECK TRAY !" appears on the display):
a Grab the outer case of the draft tray, then pull out the tray.
b Pull out the jammed draft sheet.
☞ Do not pull too hard.
For a jam at the ID label slot ("REMOVE LABEL 1" or "CHANGE LABEL" appears on the display):
Slowly pull out the jammed draft sheet or ID label sheet.
☞ Do not pull too hard.
For a jam in the ink ribbon compartment ("REMOVE LABEL 1", "REMOVE LABEL 2" or "REMOVE LABEL 3" appears on
the display):
a Open the ink ribbon compartment cover and remove the ink ribbon
cassette.
b Slowly pull the jammed draft sheet or ID label sheet out of the ink
ribbon compartment.
☞ Do not pull too hard.
For a jam near the xenon lamp unit ("REMOVE LABEL 3" appears on the display):
a Open the ink ribbon compartment cover.
b Slide the xenon lamp unit release lever up and pull out the xenon lamp
unit.
c Put your hand into the xenon lamp compartment and slowly pull out
the jammed draft sheet or ID label sheet.
☞ Do not insert your hand too far into the xenon lamp compartment.
Do not pull too hard.
31