- ページ 34

ラベルメーカー Brother Stampcreator PRO SC2000USBのPDF クイック・リファレンスをオンラインで閲覧またはダウンロードできます。Brother Stampcreator PRO SC2000USB 36 ページ。

Removing a jammed draft sheet or ID label sheet

For a jam at the draft tray slot ("CHECK TRAY !" appears on the display):

a Grab the outer case of the draft tray, then pull out the tray.

b Pull out the jammed draft sheet.

☞ Do not pull too hard.

For a jam at the ID label slot ("REMOVE LABEL 1" or "CHANGE LABEL" appears on the display):

Slowly pull out the jammed draft sheet or ID label sheet.

☞ Do not pull too hard.

For a jam in the ink ribbon compartment ("REMOVE LABEL 1", "REMOVE LABEL 2" or "REMOVE LABEL 3" appears on

the display):

a Open the ink ribbon compartment cover and remove the ink ribbon

cassette.

b Slowly pull the jammed draft sheet or ID label sheet out of the ink

ribbon compartment.

☞ Do not pull too hard.

For a jam near the xenon lamp unit ("REMOVE LABEL 3" appears on the display):

a Open the ink ribbon compartment cover.

b Slide the xenon lamp unit release lever up and pull out the xenon lamp

unit.

c Put your hand into the xenon lamp compartment and slowly pull out

the jammed draft sheet or ID label sheet.

☞ Do not insert your hand too far into the xenon lamp compartment.

Do not pull too hard.