Fujitsu PRIMERGY BX920 S1 Manual Opsi - Halaman 9

Jelajahi secara online atau unduh pdf Manual Opsi untuk Server Fujitsu PRIMERGY BX920 S1. Fujitsu PRIMERGY BX920 S1 32 halaman.

Procedure

CAUTION!

The activities described in this manual must be performed by

engineers, service personnel or technical specialists.

Equipment repairs must be performed by qualified staff.

Any failure to observe the guidelines in this manual, and any unautho-

rized opening or improper repairs could endanger the user (through

electric shock, fire hazards) or damage the equipment.

Please note that any unauthorized opening of the device will result in

the invalidation of the warranty and exclusion from all liability.

Ê First of all, carefully read the safety instructions in

tions" on page 11

Ê Make sure that you have all necessary manuals (see

overview" on page

Most importantly, you will need:

– the operating manual for the server blade and

– the service supplement.

Ê Shut down the server blade properly, switch it off, and remove it from the

system unit as described in

Ê Carry out the expansion or upgrade of your server blade as described in the

pertinent chapter.

Installation and removal of hot-plug components is described in the

server blade operating manual.

Ê Close the server blade, re-insert it in the system unit and switch it on as

described in

chapter "Completion" on page 29

Ê Start the operating system and make the appropriate configuration if

necessary (see operating manual).

BX920 S1

and following.

5); print out the PDF files if required.

chapter "Preparation" on page

Options Guide

chapter "Safety instruc-

"Documentation

15.

and following.