Fujitsu PRIMERGY BX920 S1 옵션 매뉴얼 - 페이지 9
{카테고리_이름} Fujitsu PRIMERGY BX920 S1에 대한 옵션 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu PRIMERGY BX920 S1 32 페이지.
페이지 인쇄
2
Procedure
V
CAUTION!
The activities described in this manual must be performed by
engineers, service personnel or technical specialists.
Equipment repairs must be performed by qualified staff.
Any failure to observe the guidelines in this manual, and any unautho-
rized opening or improper repairs could endanger the user (through
electric shock, fire hazards) or damage the equipment.
Please note that any unauthorized opening of the device will result in
the invalidation of the warranty and exclusion from all liability.
Ê First of all, carefully read the safety instructions in
tions" on page 11
Ê Make sure that you have all necessary manuals (see
overview" on page
Most importantly, you will need:
– the operating manual for the server blade and
– the service supplement.
Ê Shut down the server blade properly, switch it off, and remove it from the
system unit as described in
Ê Carry out the expansion or upgrade of your server blade as described in the
pertinent chapter.
I
Installation and removal of hot-plug components is described in the
server blade operating manual.
Ê Close the server blade, re-insert it in the system unit and switch it on as
described in
chapter "Completion" on page 29
Ê Start the operating system and make the appropriate configuration if
necessary (see operating manual).
BX920 S1
and following.
5); print out the PDF files if required.
chapter "Preparation" on page
Options Guide
chapter "Safety instruc-
"Documentation
15.
and following.
9