Fujitsu PRIMERGY TX300 S3 Panduan Suplemen Servis - Halaman 27

Jelajahi secara online atau unduh pdf Panduan Suplemen Servis untuk Server Fujitsu PRIMERGY TX300 S3. Fujitsu PRIMERGY TX300 S3 47 halaman.

Replacement routines

If the black plastic bar has been removed before, install it again:

Figure 8: Installing the plastic bar

Ê Place the two hooks (photo left side) of the plastic bar into the designated

punched holes of the SAS/SATA backplane holder.

Ê Push the plastic bar downward until the latch (photo right side) engages with

a click.

Ê Attach the connectors of the two SAS cables, the power cable and the I

cable to the SAS/SATA backplane (see the

Ê Attach the green cable clamp to the connector of the I

cable in the cable clamp.

Ê Reinstall all hot-plug hard disk drives.

Ê Close the server and connect all power plugs (for a detailed description see

the Options Guide).

TX300 S3

Replacing the SAS/SATA backplane

Service Supplement

figure 5 on page

24).

C cable and place the