Fujitsu fi-4220C2 Memulai - Halaman 27

Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu fi-4220C2. Fujitsu fi-4220C2 30 halaman. Flatbed scanner
Juga untuk Fujitsu fi-4220C2: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Brosur & Spesifikasi (2 halaman), Prosedur Instalasi (3 halaman), Petunjuk Pembersihan (2 halaman)

Halaman Cetak

Appendix 2

•

The glass surface inside the

ARNI N G

•

When you perform cleaning,

■ Cleaning Materials

Cleaning

Parts

Materials

Number

Cleaner F1

CA99501-

(or isopropyl

0013

alcohol)

Lint-free dry

Commercially available one

cloth

* For details about cleaning materials, contact the

FUJITSU scanner dealer where you purchased the

scanner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

DAILY CARE

ADF becomes hot during the

operation.

Before you clean inside the

scanner, turn off its power and

unplug the AC adapter from the

outlet. Wait for at least

15 minutes.

Do not turn off the scanner

when you clean the Feed roll-

ers.

make sure that the inside of the

scanner is free of any foreign

object, and be careful not to get

your hand or the cloth caught

on the pick spring (metal part)

as a deformed pick spring

(metal part) may cause injury.

Remarks

1 bottle

Moisten the cloth

with this fluid and

wipe the scanner

clean. (*)

fi-4220C2 Image Scanner Getting Started

■

Parts to Clean and When

Part to clean

Pad ASSY

Pick roller

Feed rollers

Plastic rollers

Glass

The scanner must be cleaned fre-

ATTENTION

quently if you scan any of the follow-

ing type of paper sheets:

•

Documents of coated paper

•

Documents that are almost com-

pletely covered with printed text or

graphics

•

Chemically treated documents

such as carbonless paper

•

Documents containing a large

amount of calcium carbonate

•

Handwritten documents

For details on the cleaning the ADF, refer to "3.3 Clean-

ing the ADF" in fi-4220C2 Operator's Guide on the

Setup CD-ROM".

Standard Cleaning Cycle

Clean these parts after every

1,000 scans.

AP-4