Fujitsu fi-4860C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 9
Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu fi-4860C. Fujitsu fi-4860C 30 halaman. Production color scanner
Juga untuk Fujitsu fi-4860C: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Lembar Spesifikasi (2 halaman)
Halaman Cetak
R
B
EPLACING THE
RAKE
A worn out or improperly installed Brake Roller will cause multiple feeds
and paper jams, or will display the "Separation roller worn" message on
the Operator Panel of the scanner. An improperly installed Brake Roller
may cause the "Break roller not set" message to be displayed on the
Operator Panel. The Brake Roller has an approximate life of 300,000
pages. If NCR or carbonless paper is used the life span of the Brake
Roller may be decreased by half.
•
Lift the Lever at the right to
open the Upper Transport
Unit.
•
Pull the ADF release levers
towards you and lift up the
ADF Sheet Guide Assembly.
ADF Release Levers
•
Press down on the upper
part of the Guide Plate with
your fingers at two positions.
•
Pull the Guide Plate towards
you to remove it.
fi-4860C C
R
OLLER
ADF Sheet Guide Assy.
R
ONSUMABLE
EPLACEMENT AND
Lever
Guide Plate
C
I
LEANING
NSTRUCTIONS
9