Fujitsu fi-4860C Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 7
Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu fi-4860C. Fujitsu fi-4860C 30 halaman. Production color scanner
Juga untuk Fujitsu fi-4860C: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Lembar Spesifikasi (2 halaman)
Halaman Cetak
R
P
R
EPLACING THE
ICK
A worn out, defective, or improperly installed Pick Roller Unit will cause
misfeeds and paper jams. It can also cause the "Pick roller unit not set"
message to be displayed on the Operator Panel of the scanner. The Pick
Roller Unit has an approximate life of 300,000 pages. If NCR or carbon-
less paper is used the life span of the Pick Roller Unit may be decreased
by half.
•
Lift the Lever at the right to
open the Upper Transport
Unit.
•
Pull the ADF release levers
towards you and lift up the
ADF Sheet Guide Assembly.
ADF Release Levers
•
Slide the Pick Roller Unit to
the left and remove it toward
the upper right.
fi-4860C C
U
OLLER
NIT
ADF Sheet Guide Assy.
R
ONSUMABLE
EPLACEMENT AND
Lever
Pick Roller Unit
C
I
LEANING
NSTRUCTIONS
7