Fujitsu fi-5530C - Document Scanner Memulai - Halaman 26

Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu fi-5530C - Document Scanner. Fujitsu fi-5530C - Document Scanner 28 halaman. Color departmental scanner
Juga untuk Fujitsu fi-5530C - Document Scanner: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Memulai (28 halaman), Brosur & Spesifikasi (2 halaman), Spesifikasi (2 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (14 halaman), Panduan Petunjuk Pembersihan (13 halaman), Buku Petunjuk (10 halaman)

Halaman Cetak
Fujitsu fi-5530C - Document Scanner Memulai
Appendix2
When operating the scanner, the
ARNI N G
ADF's inside glass becomes very
hot.
Before you clean inside the scan-
ner, turn off its power and unplug
the AC adapter from the outlet. Wait
for at least 15 minutes.
Do not turn off the scanner when
you clean the Feed rollers or Eject
rollers.

■ Cleaning Materials

Cleaning
Parts No.
Materials
Cleaner F1
CA99501-
(or isopropyl
0013
alcohol)
Lint-free dry
- Commercially available one
cloth
For details about the cleaning materials, contact the
FUJITSU scanner dealer where you purchased the scan-
ner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-
ened with the Cleaner F1.
AP-4
DAILY CARE
Remarks
1 bottle
Moisten a cloth with
this fluid and wipe the
scanner clean.
■ Locations and Cycle for Cleaning
Part to clean
Pad ASSY
Pick roller
Feed rollers
Plastic rollers
Eject rollers
Sheet guides
Glass
Ultra sonic sensor
The scanner must be cleaned more fre-
ATTENTION
quently if you scan any of the following
type of sheets:
•
Documents of coated paper
•
Documents that are almost completely
covered with printed text or graphics
•
Chemically treated documents such
as carbonless paper
•
Documents containing a large amount
of calcium carbonate
•
Documents written by pencil
•
Documents on which the toner is not
fused sufficiently.
For details on the cleaning the ADF, refer to "3.2 clean-
ing the ADF" in fi-5530C Operator's Guide on the Setup
CD-ROM".
Standard Cleaning Cycle
Clean these parts after every
5,000 scans.