- ページ 26

スキャナー Fujitsu fi-5530C - Document ScannerのPDF はじめにをオンラインで閲覧またはダウンロードできます。Fujitsu fi-5530C - Document Scanner 28 ページ。 Color departmental scanner
Fujitsu fi-5530C - Document Scanner にも：インストール手順マニュアル (7 ページ), インストール手順マニュアル (9 ページ), インストール手順 (3 ページ), はじめに (28 ページ), パンフレット＆スペック (2 ページ), 仕様 (2 ページ), 消耗品の交換とクリーニング (14 ページ), クリーニング取扱説明書 (13 ページ), 取扱説明書 (10 ページ)

ページを印刷する

Fujitsu fi-5530C - Document Scanner はじめに

Appendix2

When operating the scanner, the

ARNI N G

ADF's inside glass becomes very

hot.

Before you clean inside the scan-

ner, turn off its power and unplug

the AC adapter from the outlet. Wait

for at least 15 minutes.

Do not turn off the scanner when

you clean the Feed rollers or Eject

rollers.

■ Cleaning Materials

Cleaning

Parts No.

Materials

Cleaner F1

CA99501-

(or isopropyl

0013

alcohol)

Lint-free dry

- Commercially available one

cloth

For details about the cleaning materials, contact the

FUJITSU scanner dealer where you purchased the scan-

ner.

■ Cleaning Method

The ADF must be cleaned with a lint-free cloth moist-

ened with the Cleaner F1.

AP-4

DAILY CARE

Remarks

1 bottle

Moisten a cloth with

this fluid and wipe the

scanner clean.

■ Locations and Cycle for Cleaning

Part to clean

Pad ASSY

Pick roller

Feed rollers

Plastic rollers

Eject rollers

Sheet guides

Glass

Ultra sonic sensor

The scanner must be cleaned more fre-

ATTENTION

quently if you scan any of the following

type of sheets:

•

Documents of coated paper

•

Documents that are almost completely

covered with printed text or graphics

•

Chemically treated documents such

as carbonless paper

•

Documents containing a large amount

of calcium carbonate

•

Documents written by pencil

•

Documents on which the toner is not

fused sufficiently.

For details on the cleaning the ADF, refer to "3.2 clean-

ing the ADF" in fi-5530C Operator's Guide on the Setup

CD-ROM".

Standard Cleaning Cycle

Clean these parts after every

5,000 scans.