- ページ 24

スキャナー Fujitsu fi-5530C - Document ScannerのPDF はじめにをオンラインで閲覧またはダウンロードできます。Fujitsu fi-5530C - Document Scanner 28 ページ。 Color departmental scanner
Fujitsu fi-5530C - Document Scanner にも：インストール手順マニュアル (7 ページ), インストール手順マニュアル (9 ページ), インストール手順 (3 ページ), はじめに (28 ページ), パンフレット＆スペック (2 ページ), 仕様 (2 ページ), 消耗品の交換とクリーニング (14 ページ), クリーニング取扱説明書 (13 ページ), 取扱説明書 (10 ページ)

ページを印刷する

Fujitsu fi-5530C - Document Scanner はじめに

Symptom

Paper is not fed (pick error

occurs frequently, or docu-

ment stops midway).

The generated images are

elongated.

There is a shadow on the

leading edge of the gener-

ated image?

AP-2

Check this item

Do the documents satisfy the "Docu-

ment Quality" and the "Multi feed

Detection Conditions" in the chapter 6

of the fi-5530C Operator's Guide?

Is the Pick roller dirty?

Is the Pick roller worn out?

Is there any debris on the document feed

path?

Are the Feed rollers dirty?

Have you adjusted the scan scale?

Are the Feed rollers dirty?

Have you adjusted the offset (the scan-

ning starting position)?

Remedy

Use the documents that satisfy the "Document

Quality" and the "Multi feed Detection Condi-

tions" in the chapter 6 of the fi-5530C Operator's

Guide.

Clean the Pick roller. Refer to the Operator's

Guide "3.2. Cleaning the ADF".

Clean the Pick roller. Refer to the Operator's

Guide "4.3. Replacing the Pick Roller".

Remove any debris from the document feed path.

Clean the Feed rollers. Refer to the Operator's

Guide "3.2. Cleaning the ADF".

For Windows 98, Windows Me, Windows 2000,

WindowsXP, select "Scanners and Cameras" in

the control panel, then click the [Device Set] tab

to adjust scale.

For Windows 95, Windows NT 4.0, right click the

Scanner Control Center in the task tray, select

[Options] and adjust the scan scale.

Clean the Feed rollers. Refer to the Operator's

Guide "3.2. Cleaning the ADF".

For Windows 98, Windows Me, Windows 2000,

WindowsXP, adjust the [Sub-scan Setting] on

[Scanners and Cameras] in the control panel.

For Windows 95, Windows NT 4.0, right click the

Scanner Control Center, select [Options]-[Sub-

scan Setting] and adjust the offset.