Fujitsu fi-5530C - Document Scanner Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai - Halaman 11

Jelajahi secara online atau unduh pdf Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai untuk Pemindai Fujitsu fi-5530C - Document Scanner. Fujitsu fi-5530C - Document Scanner 14 halaman. Color departmental scanner
Juga untuk Fujitsu fi-5530C - Document Scanner: Memulai (28 halaman), Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Memulai (28 halaman), Brosur & Spesifikasi (2 halaman), Spesifikasi (2 halaman), Panduan Petunjuk Pembersihan (13 halaman), Buku Petunjuk (10 halaman)

Halaman Cetak
Fujitsu fi-5530C - Document Scanner Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai
C
ADF
LEANING THE
WITH
C
P
R
LEANING THE
ICK
OLLER
•
Clean the Pick Roller by
wiping it lightly with a lint-
free cloth mostened with F1
Cleaner (90 % or higher
Isopropyl Alcohol). Wipe
lightly being careful not to
break away parts of the
rubber.
Feed Rollers (2)
Pad Assembly
Eject Rollers (2)
•
To clean the Feed Rollers power on the scanner. Once it initilizes
and the dispaly shows other than "P" or "0", open the ADF cover.
Locate the Feed Rollers on the upper section of the ADF. Hold a lint-
free cloth moistened with F1 Cleaner (90 % or higher Isopropyl
Alcohol) against each of the Feed Rollers and press the "Send to"
and " Scan" buttons together. This will rotate the roller a small
amount each time you press these buttons. Pressing the "Send to"
and " Scan" buttons together 7 times will rotate the rollers one
revolution.
•
Perform the above step for each of the Feed Rollers (2) and the
Eject Rollers (2). Take care not to come in contact with the rollers as
they turn to avoid injury.
fi-4530C & fi-5530C C
L
-F
C
(
INT
REE
LOTHS
CONT
.
Sheet Guide
Pick Roller
Ultra Sonic
Sensors (2)
Plastic Rollers (4)
Glass (2)
R
ONSUMABLE
EPLACEMENT AND
.)
Pick Roller
C
I
LEANING
NSTRUCTIONS
11