Fujitsu fi-5530C - Document Scanner 소모품 교체 및 청소 지침 - 페이지 11

{카테고리_이름} Fujitsu fi-5530C - Document Scanner에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-5530C - Document Scanner 14 페이지. Color departmental scanner
Fujitsu fi-5530C - Document Scanner에 대해서도 마찬가지입니다: 시작하기 (28 페이지), 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 시작하기 (28 페이지), 브로셔 및 사양 (2 페이지), 사양 (2 페이지), 청소 지침 매뉴얼 (13 페이지), 사용 설명서 (10 페이지)

Fujitsu fi-5530C - Document Scanner 소모품 교체 및 청소 지침
C
ADF
LEANING THE
WITH
C
P
R
LEANING THE
ICK
OLLER
Clean the Pick Roller by
wiping it lightly with a lint-
free cloth mostened with F1
Cleaner (90 % or higher
Isopropyl Alcohol). Wipe
lightly being careful not to
break away parts of the
rubber.
Feed Rollers (2)
Pad Assembly
Eject Rollers (2)
To clean the Feed Rollers power on the scanner. Once it initilizes
and the dispaly shows other than "P" or "0", open the ADF cover.
Locate the Feed Rollers on the upper section of the ADF. Hold a lint-
free cloth moistened with F1 Cleaner (90 % or higher Isopropyl
Alcohol) against each of the Feed Rollers and press the "Send to"
and " Scan" buttons together. This will rotate the roller a small
amount each time you press these buttons. Pressing the "Send to"
and " Scan" buttons together 7 times will rotate the rollers one
revolution.
Perform the above step for each of the Feed Rollers (2) and the
Eject Rollers (2). Take care not to come in contact with the rollers as
they turn to avoid injury.
fi-4530C & fi-5530C C
L
-F
C
(
INT
REE
LOTHS
CONT
.
Sheet Guide
Pick Roller
Ultra Sonic
Sensors (2)
Plastic Rollers (4)
Glass (2)
R
ONSUMABLE
EPLACEMENT AND
.)
Pick Roller
C
I
LEANING
NSTRUCTIONS
11