Fujitsu fi-5530C - Document Scanner 소모품 교체 및 청소 지침 - 페이지 10

{카테고리_이름} Fujitsu fi-5530C - Document Scanner에 대한 소모품 교체 및 청소 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Fujitsu fi-5530C - Document Scanner 14 페이지. Color departmental scanner
Fujitsu fi-5530C - Document Scanner에 대해서도 마찬가지입니다: 시작하기 (28 페이지), 설치 절차 매뉴얼 (7 페이지), 설치 절차 매뉴얼 (9 페이지), 설치 절차 (3 페이지), 시작하기 (28 페이지), 브로셔 및 사양 (2 페이지), 사양 (2 페이지), 청소 지침 매뉴얼 (13 페이지), 사용 설명서 (10 페이지)

페이지 인쇄
Fujitsu fi-5530C - Document Scanner 소모품 교체 및 청소 지침
fi-4530C & fi-5530C C
ONSUMABLE
10
R
C
EPLACEMENT AND
LEANING
C
ADF
LEANING THE
WITH
Note:
The glass surface inside the fi-4530C ADF becomes hot during
scanner operation. Before performing this cleaning disconnect the
AC adapter from the power outlet and wait at least 15 minutes for
the scanner to cool.
•
Turn Scanner power off.
•
Open the ADF cover by
pressing the ADF button.
Disconnect the AC power
plug. Let the scanner cool
for at least 15 minutes after
operation. This is to prevent
burns to your skin as the
lamps will heat the surface
of the glass in the feed path.
•
Use F1 Cleaner (90% or
higher Isopropyl Alcohol) on
a lint free cloth and clean the
areas shown in the drawing
to the right. (See following
steps to clean properly)
C
P
A
LEANING THE
AD
SSEMBLY
•
Clean the Pad Assembly
using a downward stroke
with the lint free cloth
mostened lightly with F1
Cleaner (90% or higher
Isopropyl Alcohol).
I
NSTRUCTIONS
L
-F
C
INT
REE
LOTHS
Front of
Scanner
ADF button
Feed Rollers (2)
Pad
Assy
Eject Rollers (2)
.
Clean the Rubber Portion
in Direction of Arrows
Sheet Guide
Pick
Roller
Ultra Sonic
Sensors (2)
Glass (2)
Plastic
Rollers (4)