Fujitsu FI-5900C Memulai - Halaman 18

Jelajahi secara online atau unduh pdf Memulai untuk Pemindai Fujitsu FI-5900C. Fujitsu FI-5900C 30 halaman. Consumable replacement and cleaning instructions
Juga untuk Fujitsu FI-5900C: Manual Prosedur Instalasi (7 halaman), Manual Prosedur Instalasi (9 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Tambahan (4 halaman), Memulai (30 halaman), Brosur & Spesifikasi (4 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (24 halaman), Prosedur Penggantian (22 halaman), Petunjuk Pembersihan (2 halaman)

Halaman Cetak
Fujitsu FI-5900C Memulai
For FUJITSU ISIS Scanner Driver
■ Preparation
Confirm the following items before installing the appli-
cation.
• Take out the Setup CD-ROM from its pack-
age, but do not insert the Setup CD-ROM
into the CD driver yet.
• Connect the scanner correctly to your PC.
For details on how to connect the scanner,
HINT
refer to "2.2 Connecting the Scanner to
Your PC" on page 4.
■ Installing the FUJITSU ISIS
Scanner Driver
Windows XP screenshots are used in this
HINT
section as examples. The windows and
operations may vary slightly depending on
your OS.
1. Open the hopper.
Be sure to open the hopper before turning
ATTENTION
on the power with the Power button.
2. Press the power button to turn the scanner ON.
3. Turn on your PC and log on to Windows.
10
Power button
Hopper
When using Windows NT 4.0, Windows
ATTENTION
2000 or Windows XP, log on as a user with
"Administrator" privileges.
⇒
If the scanner is automatically detected,
[Found New Hardware Wizard] or [Add/
Remove Hardware Wizard] dialog box will
appear.
4. Click [Cancel] to close the Wizard window.
5. Insert the "Setup CD-ROM" into the CD drive.
⇒
<SETUP DISK START UP SCREEN>
appears.
This screen may not appear when the
ATTENTION
"Autoplay" setting of your CD drive is off.
In this case, run "Install.exe" in this CD-
ROM directly from "Explorer" or "My Com-
puter".
6. Click [INSTALL PRODUCTS] and then click
[ISIS Driver].