Fujitsu FI-5900C Manual Prosedur Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Manual Prosedur Instalasi untuk Pemindai Fujitsu FI-5900C. Fujitsu FI-5900C 9 halaman. Consumable replacement and cleaning instructions
Juga untuk Fujitsu FI-5900C: Memulai (30 halaman), Manual Prosedur Instalasi (7 halaman), Prosedur Instalasi (3 halaman), Brosur & Spesifikasi (2 halaman), Panduan Tambahan (4 halaman), Memulai (30 halaman), Brosur & Spesifikasi (4 halaman), Petunjuk Penggantian dan Pembersihan Bahan Habis Pakai (24 halaman), Prosedur Penggantian (22 halaman), Petunjuk Pembersihan (2 halaman)

Fujitsu SCSI Scanner Installation Procedures

6. Insert your WinNT CD system disk and click OK.

7. When prompted to reboot, select no.

8. Then go to www.adaptec.com, and click on the "search" tab. Scroll down to the

"Enter key word or quoted phrase" box and type in "aspi32.exe."

9. Next scroll down to the drivers section, click on "aspi32.exe" and follow the prompts

to download it to your desktop or a new folder.

10. Afterwards go to that location and double click on the "aspi32.exe" icon.

11. Follow the prompts and then reboot.

If there are no errors then shut down your system and go to the next step.

Special note: If you are using a different SCSI controller than what is shown in these examples

then select the "Have Disk" button, insert your driver CD into the CD Rom, and follow the

prompts.

Check the SCSI drivers

•

Once the driver has been added, return to Control Panel

•

Double-click on 'Devices'

•

Search for 'aic78xx' under Device

Ensure the aic78xx entry under Device displays 'Started' under Status and 'Boot' under Startup

as seen here. Ensure 'Aspi32' entry under Device displays 'Started' under Status and

'Automatic' under Startup as seen above.

Rev051906A

Windows NT 4.0

Page 3 of 9